Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application     

Luís C. Silva  Paulo B. Lourenço  Gabriele Milani 《地震工程与结构动力学》2020,49(9):841-862

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献   

Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

BDS卫星差分码偏差稳定性分析及其短期预报     

梅登奎  闻德保 《大地测量与地球动力学》2020,40(7):746-750

利用MGEX(multi-GNSS experiment)发布的BDS卫星差分码偏差(differential code bias, DCB)产品，比较分析不同太阳活动水平下BDS卫星DCB产品的稳定性变化特性，并采用差分自回归移动平均(auto-regressive integrated moving average, ARIMA)时间序列预测模型，实现不同太阳活动水平下BDS卫星DCB的短期预报。结果表明，在太阳活动高年，BDS卫星DCB日解值稳定度、月稳定性均明显低于太阳活动低年，且不同卫星星座类型的BDS卫星DCB稳定性也存在差异；ARIMA时间序列预报结果与MGEX发布值符合程度较好，优于多项式拟合法预测结果。  相似文献   

Exploration prospects of oil and gas in the Northwestern part of the Offshore Indus Basin,Pakistan     

《China Geology》2020,3(4):633-642

Oil and gas resources are short in Pakistan and no commercially viable oil and gas sources have been yet discovered in its offshore areas up to now. In this study, the onshore-offshore stratigraphic correlation and seismic data interpretation were conducted to determine the oil and gas resource potential in the Offshore Indus Basin, Pakistan. Based on the comprehensive analysis of the results and previous data, it is considered that the Cretaceous may widely exist and three sets of source rocks may be developed in the Offshore Indus Basin. The presence of Miocene mudstones has been proven by drilling to be high-quality source rocks, while the Cretaceous and Paleocene–Eocene mudstones are potential source rocks. Tectonic-lithologic traps are developed in the northwestern part of the basin affected by the strike-slip faults along Murray Ridge. Furthermore, the Cretaceous and Paleocene–Eocene source rocks are thick and are slightly affected by volcanic activities. Therefore, it can be inferred that the northwestern part of Offshore Indus Basin enjoys good prospects of oil and gas resources.  相似文献   

基于线粒体控制区序列的花斑蛇鲻遗传多态性分析     

李敏  孔啸兰  许友伟  陈作志 《热带海洋学报》2020,39(4):42-49

花斑蛇鲻(Saurida undosquamis)是一种重要的底层经济鱼类, 本研究利用线粒体控制区(D-loop区)序列分析了中国近海分布的花斑蛇鲻的遗传结构和遗传多样性, 一共测定了6个地理群体129尾样本的D-loop区全序列。结果显示, 全长为921bp的序列包含71个多态性位点, 共检测到101个单倍型。花斑蛇鲻总体呈现很高的单倍型多样性(0.9873 ± 0.0048)和较低的核苷酸多样性(0.0132 ± 0.0067)的特征。基于邻接法构建的单倍型系统发育树的拓扑结构很浅, 没有形成分化明显的支系。单倍型在各个地理群体中的分布呈分散交叉状态, 表明地理群体间没有显著的遗传分化。6个群体的分子方差分析显示, 花斑蛇鲻绝大部分的遗传变异(99.87%)来源于群体内的个体之间, 而群体间的变异仅占0.13%。大部分地理群体之间的遗传分化指数(F_ST)均很小, 揭示了群体间的基因交流很频繁, 存在高度的遗传同质性。这些研究结果表明中国近海的花斑蛇鲻遗传多样性丰富, 没有明显的遗传分化, 是一个随机交配群, 可以作为同一个渔业单元来管理。  相似文献   

基于SLAF测序分析3个塔形马蹄螺群体的遗传结构和多样性*     

黄景  欧泽奎  刘文广  何毛贤 《热带海洋学报》2020,39(5):1-18

塔形马蹄螺(Tectus pyramis), 海洋软体动物, 广泛分布于中国深圳大鹏湾、海南岛、西沙和南沙群岛的珊瑚礁生态系统中。文章采用特异性位点扩增片段简化基因组测序技术(SLAF-seq)对来自深圳(SZ)、三亚(SY)和西沙(XS)的塔形马蹄螺群体的遗传多样性和结构进行分析。通过测序共获得115.74Mb读长数据, 平均测序深度为337.87倍, 测序质量值(Q₃₀)平均为94.07%。研究获得118679个多态性SLAF标签, 获得846502个高度一致的群体单核苷酸多态性位点(SNPs), 其中有155个显著差异SNPs。3个群体的平均观察杂合度(H_o)和期望杂合度(H_e)值分别为0.1441~0.1611和0.2537~0.2695。平均多态性信息含量(PIC)为0.2048~0.2176。通过系统发育树分析、主成分分析和聚类分析, 将45个个体大致分为3个类群, 每个群体的所有个体都可以聚类成一个类群。SZ和SY群体的遗传结构相似, 遗传距离最低(0.2510), 遗传分化系数F_st值最低(0.0818)。但XS与其他两个群体间的遗传分化明显, 尤其是XS和SZ群体(F_st=0.1868)。3个群体的遗传分化可能与海流和地理位置有关。  相似文献   

燕山中部大地热流及岩石圈热结构特征——以承德市七家- 茅荆坝地热田为例     

刘峰  王贵玲  张薇  岳晨  陆川  黄起伟  欧小科 《地质学报》2020,94(7):1950-1959

燕山中部地区地热资源丰富,地热地质条件较好,但该地区大地热流测量工作较少,岩石圈热结构研究尚未开展,制约了该地区的地热地质研究与资源勘探开发。本文以该地区的七家-茅荆坝地热田为典型区,结合地温测井、取样测试、数据收集与分析,初步查明燕山中部大地热流特征及浅部-深部岩层热物性特征,填补了大地热流值测量空白区,在此基础上建立了研究区热结构概念模型,估算其深部地温分布。研究得出燕山中部大地热流值变化较大,平均约57 mW/m~2,与周边温泉水温存在较好的相关关系。其中七家-茅荆坝地热田大地热流值较高,为74.9 mW/m~2。通过深部地温分布计算得出七家—茅荆坝地区居里面埋深为21.5～22.8 km,莫霍面温度约815℃,分析结果与前人研究成果较为一致,验证了本文所建立岩石圈热结构模型的准确性。  相似文献   

浙南花岗岩残积土物质结构及工程地质特性研究     

孙强  张泰丽  伍剑波  王赫生 《地质论评》2020,66(S1):163-166

  相似文献